PTR Changelog 2017-07-20: world shards
Honestly, imagine if the market had been released in the opposite state as it was. Instead of there being no user-facing UI to place orders, that's the only way that we can place orders. Code can only look at the orders on the market, in order to actually buy from an order you'd have to go to the UI.
After all, the market doesn't affect gameplay. Credits exist outside of gameplay, they're tied to your account. Having more or less credits doesn't affect your AI in any way, so it can't even see them. All your AI can do is look at the market and send you an email going "Hey, it'd be pretty cool if you bought X from this order", or "Hey, could you put up these excess resources as a sell order?"
We'd have called you insane, and rightly so. That obviously isn't what we want out of a game that's about automation.
That is exactly what is going on here.
Since we are getting pretty heated here, I think its probably good to point out that everyone is surprised and impressed that shards are in a testing state so soon. We know there will be plenty of development and tuning involved, but thank you for addressing this in a timely manner.
That said, I think people are getting concerned about the direction the game is going. Given that this is a game about automation (#factorio) and writing code, specifically limiting that is something that would of course irritate the people that are drawn to this game for that exact reason.
As for CPU, I think that it should 100% be controllable by code. 1 min example of what I as a user would want.
Game.cpu.maxCPLimit = total account CPU
Game.cpu.shardCPULimit = cpu the shard is allocated
Game.cpu.setShardCPU = Set your cpu allocation on the shard.
Game.cpu.freeCPU = Amount of CPU allocated to your account not currently used in one of the shards.
In order to increase the amount of cpu a shard has, you have to have unallocated CPU in your account. So to shift from shard to shard, you reduce your cpu limit in that shard, so for a number of ticks you are effectively missing account cpu as it sits unallocated. Once it registers that you have spare cpu you can increase your limit in another shard by up to that cpu amount.
That way with the memory segments you can request CPU from your other shards, but it also prevents frequent flipping around as it results in wasted spare cpu.
I would have new cpu from gcl etc go to whatever shard has the highest existing allocation, unless the user sets a default shard.
I think that there should be some ability to control per-shard CPU allocation, otherwise certain designs of a program become limited by trivial manual interaction. Some examples:
- When someone attacks a room, activities including scanning all rampart health values, recording and predicting the positions and actions of all hostile creeps, generating and updating e.g. Dijkstra maps for defender movement and running tower-attack allocation code all become important. Even more so if your defence involves active components e.g. intercepting incoming hostiles. If a shard has rooms come under attack, the user would need to be emailed about the attack, see the email, log in, and then allocate extra CPU to the shard to be able to defend effectively. On live, code automatically (for many of us) stops unimportant processes to save CPU to allow this to happen (e.g. lab code terminated when invaded to save CPU) - but this paradigm doesn't work if the CPU cap is low.
- Some cacheable actions, like generating and caching paths or costmatrices for pathing (for combat, or remote mining, or whatever) require high amounts of CPU usage for a very small number of ticks. To allow these scheduled, but uncommon (once per 30,000 ticks or so) updates to occur, I would need to manually reallocate extra CPU to a shard, wait for the new caches to be written, then deallocate it to that shard.
- An AI will not be able to automatically expand to new rooms (or automatically retaliate against attacks) if it cannot guarantee the CPU required to do so. A player who wants a new room would have to select the shard they want - in advance - and allocate the new CPU to it in order to allow such expansion to occur, before their code can then reliably and safely expand.
I also have some questions about allocation:
How will the bucket and 500CPU limit work with shards? On a single shard I can guarantee the order in which actions occur in order to use as much bucket *as required when required*. If I am on two shards and both need to hit the bucket in one tick (say path regeneration occurs) -
- Can I guarantee and control the order in which my bucket is used and accesses between shards?
- Can I control how much of the (500-usermaxCPU) bucket I have to spend in a tick goes to each shard?
- If one shard hard resets (1,000 cpu or whatever) - what happens to the other shard next tick?
update: I have been informed each may get their own bucket. How would that interact with using a shard with a faster tick rate to do expensive computations that can be sent back to other shards? If I make a small room and allocate 1CPU more than it ever needs on a shard, I would thus have a essentially free bucket to use for computation.
Something I just thought of.
If our code doesn't know which shards have CPU allocated to them, how can my AI know which portals it should send creeps through? Should I just blindly send CLAIMers through portals hoping that my caretaker has allocated the appropriate amount of CPU to the other side? Am I (as the caretaker) supposed to manually poke values into memory indicating which shards I've allocated memory to?
Am I going to have to literally write an out of game tool that scrapes the web UI for CPU allocation, pokes the values into memory, and then occasionally reads some segment of memory and pushes the desired allocation back to the UI? Because it's impossible to stop that from happening, and sufficiently motivated players will build this tool - and now you've just done two things:
- Forced me to implement an out of game solution to an in-game problem
- Put this feature out of reach of people who aren't able or willing to do the same
To be clear, because I've been pretty hostile in this thread, I am blown away that you guys already have a working shard implementation at all. I'm just extremely frustrated that you are making it more difficult to write code that controls this programming game.
Anisoptera, while being a tad aggressive... does make me think of an issue
If I send a creep through a portal into a new shard, do I have to have pre-allocated CPU for the creep to be able to move off the portal?
With programmatic controls, that wouldn't be too hard, as I can read the destination and give it some minimal CPU amount.
@artem Quick clarification, `Your GCL and CPU limit should be allocated...` Are we going to be allocating CPU directly? LIke 25 to shard0, 20 to shard1, 45 to shard2, etc, or just redistrubuting GCL points (Thus 1 point towards shard1 = GCL1 on that shard and 20CPU )
@kotarou from docs: If this is an inter-shard portal, then this property contains an object with
roomstring properties. Exact coordinates are undetermined, the creep will appear at any free spot in the destination room.
vrs last edited by
One suggestion: I'd love it if the shard-portals were way more rare, and if they not only occurred in highway rooms. It would add strategic value to holding certain rooms and zones for alliances. It will also help in making shard populations evolve independently from each other (other players settling the same space). As it is now, new players in shard1 may get squashed often by their upstairs neighbors.
For clarity, I'd also suggest using different naming, like "conduit" instead of "inter-shard portal", since their mechanics are very different.
I can't imagine it working any other way. Which is my point. I can't send a creep through a portal I just discovered. I have to wait until my caretaker allocates CPU (or GCL) to that shard. And I don't have any way to know when that has happened (at least, no in-game method - of course my caretaker could have written some values to memory.)
"@ags131: what @kotarou was asking is, if I send a creep over to the other shard, do I need CPU allocated there to be able to control it?
I can't imagine it working any other way. Which is my point. I can't send a creep through a portal I just discovered. I have to wait until my caretaker allocates CPU (or GCL) to that shard. And I don't have any way to know when that has happened (at least, no in-game method - of course my caretaker could have written some values to memory.)"
Honestly, I'd be fine with a base 1 cpu per tick in each shard but a capped bucket of 100cpu unless you allocate account cpu to it. Have a players code only run if you have something in that shard. That way if they wander into a shard they have a bit of a grace period to move around and/or allocate cpu. It also lets you explore a shard without having to move your allocations around.
> ...move off the portal?
This is what I was responding to, the creep will NOT be on a portal
> Honestly, I'd be fine with a base 1 cpu per tick in each shard but a capped bucket of 100cpu unless you allocate account cpu to it. Have a players code only run if you have something in that shard. That way if they wander into a shard they have a bit of a grace period to move around and/or allocate cpu. It also lets you explore a shard without having to move your allocations around.
Maybe a base 10 instead? With base 1 you can never refill your bucket, which means you won't be able to run `require` statements on your code after a certain point.
10 seems fine if it doesn't cause any concerns on their side. Plenty of 10cpu players would be happy suddenly getting a lot more too.
But really, I don't think they should be running every single main world player's code each tick on all the shards. I think it should only run if you have something there.
Hence why 1 cpu would fill a bucket if no code is running. It would also limit outsourcing code requests to shards you are farming cpu on because you would need a physical presence in the shard to run the calcs. If you didn't require it you could just use the 10cpu to farm up cpu and run a bunch of calcs.
Thats one thing about it, IF its purely allocating GCL points and not CPU directly, you can just allocate 1 GCL to each shard, bam, instant 20CPU(?) available on each since each would effectively be at GCL1. That or maybe give 1 'free' GCL point per shard that cannot be allocated away.
> But really, I don't think they should be running every single main world player's code each tick on all the shards. I think it should only run if you have something there.
Currently (as in right now on PTR) if you do not have at least one creep or a claimed room (possibly just the structure) then your code does not run.
Then why wouldn't a 1 cpu base allocation work? It should still fill a player bucket up. Nothing against 10 but curious since you mentioned it wouldn't work previously.
bucket doesn't build if your code doesn't run.
Really? Because when we skip ticks etc I thought your bucket filled up.
I just double checked in the source to make sure I'm thinking of this right, when skipping ticks, your user is kicked out very early. When you have no objects, your user also exits out early before the bucket is updated. With shards, each shard is effectively its own seperate server, so if you have no creeps, structures, or rooms, you have no objects, therefore it exits out early.
Hm good to know, definitely not impossible to change if they decide to go that route.