How are we upgrading our creeps?

Reply to How are we upgrading our creeps? on Invalid Date

RaskVann — Invalid Date

Was interested if anyone had a good way of upgrading their creeps in a more dynamic way. So far I've only been able to successfully store the body in advance, for example:

var gatherBody = [CARRY, MOVE, CARRY, MOVE, CARRY, MOVE];

While it's dead simple to see the pattern here, this is a fixed string array and so trying to add another CARRY,MOVE when you've freed up another 100 energy with capacitors (easily checked with aRoomPointer.energyAvailable or aRoomPointer.energyCapacityAvailable) can't really be done (read above: FIXED array).

I feel like I missing something obvious so I was wondering if anyone had any methods of saying (if I have this much more energy, add these components).

This would be so much easier with a LinkedArray that supports .add() but as far as I can tell it isn't supported.

Reply to How are we upgrading our creeps? on Invalid Date

Actium — Invalid Date

You can predefine levels for every role as follows:

var carrier_levels = [ { cost: 100, body: [ CARRY, MOVE ] }, { cost: 200, body: [ CARRY, MOVE, CARRY, MOVE ] } ];

Then select most appropriate level for certain conditions.

Reply to How are we upgrading our creeps? on Invalid Date

RaskVann — Invalid Date

I'm not sure why I didn't think of a 2D array. Thanks a bunch Actium, I should be able to wip something up rather quick.

Reply to How are we upgrading our creeps? on Invalid Date

Beowulfe — Invalid Date

You could also do:

var gatherBody = [CARRY, MOVE, CARRY, MOVE, CARRY, MOVE];

if (some condition)
gatherBody = gatherBody.concat([CARRY, MOVE]);

Which will add another CARRY and another MOVE on to the original array.

Reply to How are we upgrading our creeps? on Invalid Date

heggico — Invalid Date

var bodyparts = [];
bodyparts.push(CARRY);
bodyparts.push(MOVE);

Works fine? You can then check how many parts you want and just loop the 2 .push()

Reply to How are we upgrading our creeps? on Invalid Date

bometo — Invalid Date

My code

for each role define parts percent in the body and cost. totalPercent is the max amount of a room energy it will use
   parts: {
       pieces:[
            {typeName:WORK, percent:0.5, cost:100},
           {typeName:CARRY, percent:0.25, cost:50},
           {typeName:MOVE, percent:0.25, cost:50}
       ],
       totalPercent:0.67
   },

then you just have to go through parts.pieces the amount of each part is percent * energyRoom * totalpercent /cost

And then loop pushing each typeName in an array